Home › Hair Extensions › Nano Ring

Ultra-Small Beads · Fine Hair Install

Nano Ring Hair Extensions

Name: Nano Ring Hair Extensions
Brand: VeeJeen

The smallest bead system in the extension category. 1.5-2.5mm silicone-lined nano beads for undetectable install on fine or thin natural hair.

Get Wholesale Price Request Samples

2mm Nano Beads0.5g Per StrandZero HeatFine Hair Safe

Product Introduction

The Smallest Bead System for Fine Hair

Nano ring extensions were built to solve one problem — micro beads are still visible on fine hair. Nano beads at 2mm are half the size of micro beads, and the strand weight drops to 0.5g. The result: an install that stays hidden even on very fine natural hair.

Every nano ring extension shipped by VeeJeen passes through the same 4-gate QC that every other hair extension on our floor passes. Mixed-SKU orders — tape-in paired with K-tip paired with hand-tied weft — all meet the same cuticle alignment, color tolerance, and shed-rate thresholds, so the salon tech installing them works to one consistent spec rather than product-by-product guesswork.

The nano ring extension is salon-floor-tested across 400+ accounts in 25 countries. Install times, wear duration, and reinstall cycles that we quote are measured against real salon data from working accounts — not vendor-side laboratory tests. Numbers you can quote to your own salon team without caveat.

Ultra-small 2mm beadHalf the size of micro rings
0.5g per strandHalf the weight of I-tip strands
Silicone-lined beadNo friction damage to fine natural hair
Cold fusion installNo heat, no glue — safe for damaged hair
6-8 week wearMove-up cycle same as I tip

Nano Ring · 2mm Bead

Product Variants

Nano Ring Variants

Different bead sizes and strand configurations for fine hair install.

Best Seller

Variant Ⅰ · Standard

Standard Nano

Classic nano ring with 2mm silicone-lined bead. Works for most fine hair install cases.

Bead size2mm

Weight0.5g

Hold6-8 weeks

Use caseFine hair

Variant Ⅱ · Extra fine

Ultra Nano

The smallest bead available — 1.5mm for the finest natural hair. Nearly invisible install.

Bead size1.5mm

Weight0.3g

Hold6-7 weeks

Use caseVery fine hair

Variant Ⅲ · Volume

Nano Plus

Slightly larger nano bead at 2.5mm for slightly thicker fine hair. More bond strength.

Bead size2.5mm

Weight0.7g

Hold7-8 weeks

Use caseFine-medium hair

Variant Ⅳ · Textured

Curly Nano

Nano ring with wave, curl, or kinky-curly hair textures. Same bead system on textured base.

Bead size2mm

TexturesWave/Curl/Kinky

Hold6-7 weeks

Use caseFine textured hair

Product Gallery

See the Nano Ring Detail

Bead close-ups, threading demo, and full install outcome.

Nano Bead Install

Bead Close-Up

Threading Demo

Length Range

Color Card

Nano Pliers

Client Wear

100 Strand Pack

Blonde 20 Inch

Specifications

Complete Product Spec Sheet

Every variant in one table so you can spec out your order without a callback.

Attribute	Standard Nano	Ultra Nano	Nano Plus	Curly Nano
Hair Type	100% Remy human	100% Remy human	100% Remy human	100% Remy human
Tip Material	Italian keratin	Italian keratin	Italian keratin	Italian keratin
Bead Size	2.0mm	1.5mm	2.5mm	2.0mm
Bead Material	Silicone-lined	Silicone-lined	Silicone-lined	Silicone-lined
Weight per Strand	0.5g	0.3g	0.7g	0.5g
Strands per Pack	100	100	100	100
Pack Weight	50g	30g	70g	50g
Length Range	14-24 inch	14-22 inch	14-24 inch	14-24 inch
Wear Duration	6-8 weeks	6-7 weeks	7-8 weeks	6-7 weeks
Reusable Cycles	2-3 cycles	2 cycles	2-3 cycles	2 cycles
Colors	40+ shades	30+ shades	40+ shades	25+ shades
MOQ	50 packs	50 packs	50 packs	50 packs
Private Label MOQ	100 packs	100 packs	100 packs	100 packs
Factory-Standard Guarantees · Uniform Across All Variants
Cuticle Alignment	100% root-to-tip	100% root-to-tip	100% root-to-tip	100% root-to-tip
Remy Grade	Full-cuticle Remy	Full-cuticle Remy	Full-cuticle Remy	Full-cuticle Remy
Tensile Strength	> 60N per strand	> 60N per strand	> 60N per strand	> 60N per strand
ΔE Color Tolerance	< 2.0 vs. reference	< 2.0 vs. reference	< 2.0 vs. reference	< 2.0 vs. reference
Shed Rate Guarantee	< 3% per pack	< 3% per pack	< 3% per pack	< 3% per pack
Moisture Content	< 12% at pack seal	< 12% at pack seal	< 12% at pack seal	< 12% at pack seal
Wash Fastness	10-cycle salon-tested	10-cycle salon-tested	10-cycle salon-tested	10-cycle salon-tested
Pack Weight Tolerance	± 2% declared	± 2% declared	± 2% declared	± 2% declared
Batch QC Card	Included in every pack	Included in every pack	Included in every pack	Included in every pack
Master Carton Barcode	Tracks to source ledger	Tracks to source ledger	Tracks to source ledger	Tracks to source ledger
Regulatory & Compliance Standards · Documentation Available
Regulatory Filing Support	Documentation for FDA / EU CPNP / ASEAN filings	Documentation for FDA / EU CPNP / ASEAN filings	Documentation for FDA / EU CPNP / ASEAN filings	Documentation for FDA / EU CPNP / ASEAN filings
Third-Party Lab Testing	SGS or Intertek pulls arrangeable at buyer cost	SGS or Intertek pulls arrangeable at buyer cost	SGS or Intertek pulls arrangeable at buyer cost	SGS or Intertek pulls arrangeable at buyer cost
Batch Traceability Serial	Unique serial per carton, links to source ledger	Unique serial per carton, links to source ledger	Unique serial per carton, links to source ledger	Unique serial per carton, links to source ledger
Retained Batch Sample	12 months minimum (hair) / 24 months (adhesive)	12 months minimum (hair) / 24 months (adhesive)	12 months minimum (hair) / 24 months (adhesive)	12 months minimum (hair) / 24 months (adhesive)
QC Documentation Language	English, refreshed per lot, notarized on request	English, refreshed per lot, notarized on request	English, refreshed per lot, notarized on request	English, refreshed per lot, notarized on request
Grade Tier Options · Available Across All Variants
Grade: Standard Remy	Cuticle-aligned Remy, base grade · base price	Cuticle-aligned Remy, base grade · base price	Cuticle-aligned Remy, base grade · base price	Cuticle-aligned Remy, base grade · base price
Grade: Double Drawn	∼85% of strands at full declared length · +25% unit cost	∼85% of strands at full declared length · +25% unit cost	∼85% of strands at full declared length · +25% unit cost	∼85% of strands at full declared length · +25% unit cost
Grade: Super Double Drawn	∼95% of strands at full declared length · +40% unit cost	∼95% of strands at full declared length · +40% unit cost	∼95% of strands at full declared length · +40% unit cost	∼95% of strands at full declared length · +40% unit cost
Grade: Virgin Cuticle	Untouched cuticle, never chemically processed · +55% unit cost	Untouched cuticle, never chemically processed · +55% unit cost	Untouched cuticle, never chemically processed · +55% unit cost	Untouched cuticle, never chemically processed · +55% unit cost

How It Works

Nano Ring Install Workflow

Same cold-fusion method as I tip — smaller beads, finer install.

Stage Ⅰ

Ⅰ

Section Hair

Part hair into thin sections.

Stage Ⅱ

Ⅱ

Thread Nano

Pull small natural hair section through nano bead.

Stage Ⅲ

Ⅲ

Insert Strand

Slide nano strand into bead beside natural hair.

Stage Ⅳ

Ⅳ

Clamp Bead

Squeeze nano bead flat with nano pliers.

Stage Ⅴ

Ⅴ

Style & Blend

Blend and style hair together.

Production & Quality

How Every Pack Is Built

Documented QC from raw material intake through sealed pack.

CxIntake Gate

Cuticle Alignment Verify

40x microscope check on 6 strands per bundle. 100% root-to-tip alignment required or bundle rejects at intake. Verified by 40x microscope on 6 strands per intake bundle; any reversed direction rejects the whole bundle.

ReIntake Gate

Remy Grade Confirm

Cross-check against source ledger. Reject any bundle showing mixed cuticle direction — the signature of non-Remy hair blended in. Full-cuticle Remy, cuticle direction matched root-to-tip across 100% of strands at intake.

TsAssembly

Tensile Pull Test

Digital force gauge, 5-strand sample per hour. Threshold >60N single-strand pull to break. Fails trigger station halt. Threshold > 60N per single strand; batches failing twice are reworked and retested, not shipped on waiver.

ΔEColor Lab

Spectrometer Color Match

X-Rite Ci64 reflectance spectrometer. Every dyed batch measured against reference swatch to ΔE < 2.0. X-Rite Ci64 unit, calibrated weekly against certified white tile; cross-batch readings archived 12 months.

ShAssembly

Shed Weight Measurement

0.01g scale. Comb 50 strokes, weigh loss. Shed rate must stay < 3% of pack weight. Above — reject pack. ± 2% weight tolerance per pack at 0.5g scale resolution; signed QC card inside every pack verifies.

MoIntake & Pack

Moisture Content

Gravimetric analyzer at 105°C. Threshold < 12%. Above — re-dry batch and retest before it moves forward. Gravimetric moisture analyzer at 105°C; threshold < 12% content before every pack seal.

WfPost-Color

Wash Fastness Simulation

10-cycle home laundry rig. No detectable color loss. Fails send batch back to color lab for reformulation. 10-cycle salon wash simulation on retained sample; batches showing any color loss are reworked, not shipped.

TgFinal QC

Tangle Resistance Test

Dry-comb and wet-comb behavior graded 1–5 scale. Only grades 4 and 5 ship. Standard for every SKU. Dry-comb and wet-comb behavior graded on a 1–5 scale; only grades 4 and 5 ship from the final QC gate.

PkPack Gate

Pack Weight Verify

Every pack weighed against declared spec. Tolerance ± 2% at 0.5g resolution. Signed QC card inside every pack. Every pack weighed against declared spec, tolerance ± 2% at 0.5g resolution, with signed QC card inside.

BtFinal QC

Batch Traceability

Every carton labeled with batch number that tracks back through color lot, tying station, and source ledger. Serial batch number per carton; links back to source ledger, color lot, tying station, pack shift.

Wholesale Program

Order Nano Ring by the Case

Standard nano rings and colors at wholesale pricing.

MOQ 50 packs per SKU
Tier discounts at 100, 300, 500 packs
Mix variant, color, length in one order
Samples billed at product cost + shipping
Full payment upfront — no partial deposits
DDP shipping supported

See Wholesale Program

Private Label

Your Brand on Every Pack

Full private label with custom color, packaging, and specs.

Custom packaging box & hang tag
Custom color ring (15-40 shades)
Custom bead size options
Custom pack weight
MOQ 100 packs on private label
Custom orders require full payment upfront

Start Private Label

Ideal Buyers

Who Buys Nano Ring From VeeJeen

Salons specializing in fine hair install and damage-conscious clients.

Buyer Ⅰ

Fine Hair Salons

Salons specializing in fine and damaged hair install. Validated against 400+ salon accounts across 25 countries; install times and wear data are from real salon floor.

Buyer Ⅱ

Distributors

Distributors stocking specialty fine-hair extension. Distributor accounts unlock 8–12% below salon wholesale price, split-ship to 8 destinations per PO.

Buyer Ⅲ

Brand Owners

Brands positioning around gentle install methods. Private-label brand incubation: 6-phase path from discovery call to first PO, typically 60–75 days end-to-end.

Buyer Ⅳ

Cold Fusion Stylists

Stylists specialized in bead-and-loop installs. Independent stylist orders ship from the same 50-pack MOQ as salons; same wholesale price, same QC pack.

What Ships With Nano Ring

Products commonly ordered together.

Product FAQ

Nano Ring Buying Questions Answered

Q1What is a nano ring hair extension?

Nano ring is a hair extension installed with ultra-small 2mm silicone-lined beads — half the size of standard micro rings. Designed for fine or thin natural hair where standard beads would be visible.

Q9How do you prevent color drift across large multi-batch orders?

Every large order (200+ packs) is produced against a single locked color formulation filed under your account. Between batches, the color lab runs a spectrometer cross-check against your reference swatch and against the previous batch. Cross-batch tolerance is ΔE < 1.5. Any batch outside that range is reworked before it moves to assembly.

Q10What is your policy on strand-count discrepancy at receipt?

Every pack is weighed at the final QC gate and marked with declared count on the signed QC card inside. If your receiving count differs from the label by more than the ± 2% weight tolerance, notify Cici within 7 days with a photo of the pack and QC card. We reship or credit the difference at cost.

Q11Do you provide batch traceability documentation for regulatory filings?

Yes. Every carton carries a serial batch number that tracks back through the source ledger, color lab batch, tying station, and packing shift. On request we produce a Batch Trace Report in English, suitable for FDA cosmetic filings, EU CPNP submission, or third-party lab chain-of-custody documentation.

Q12Can I request retained batch samples for my own QC records?

Yes. We hold retained samples of every production lot for 12 months as standard. On request at the time of PO, we can produce a duplicate retained sample for your records, sealed, labeled with the batch number, and shipped alongside your consignment. No additional fee below 5 samples per PO.

Q2What is the difference between nano ring and micro ring?

Nano beads are 2mm vs 3-3.5mm micro beads. Nano strands are 0.5g vs 1g I-tip strands. Nano ring is undetectable on fine hair where micro ring would show. Same cold-fusion install technique.

Q3Are nano rings damaging to fine hair?

No. Silicone-lined bead prevents friction damage. 0.5g strand weight is half the pull-load of I-tip. Zero heat means no thermal damage. The gentlest permanent install available for fine hair.

Q4How long does nano ring installation last?

One install cycle lasts 6 to 8 weeks. Move beads up as natural hair grows. Reinstall same hair for 2-3 cycles before replacement. Hair itself lasts 6-12 months with proper care.

Q5What is the MOQ for wholesale nano ring?

MOQ is 50 packs per SKU on stock colors and lengths. Custom colors or private label sets require 100 packs minimum. Standard pack is 100 strands, 50g total.

Q6Can I use standard micro-bead pliers on nano beads?

No. Nano beads require nano-specific flat-jaw pliers with narrower jaw width. Standard bead pliers will not compress nano beads correctly. Nano tool kit sold separately.

Q7Do you offer private label nano ring?

Yes. Private label covers packaging box, hang tag, insert card, custom color ring, bead size options, and pack weight. Includes retail-ready boxing.

Q8What payment terms apply to orders?

Bank transfer, Alibaba Trade Assurance, PayPal, and Western Union. Custom and private label orders require 100 percent payment upfront. Stock orders also require full payment before production or shipment. No partial deposits.