Home › Supplies › Bond Remover
Bond Remover · Clean Take-Down

Hair Extension Bond Remover

Extension bond remover for keratin fusion, tape adhesive, and UV bond dissolution. Fast release, no oily residue, safe for natural hair.

Get Wholesale Price Request Samples
3 Formula TypesFast ReleaseNo Oily ResidueSkin-Safe
Product Introduction

Clean Take-Down for Every Extension Bond Type

Every extension install eventually comes down. Our remover formulas dissolve keratin bonds, tape adhesive, and UV resin without damaging natural hair. Non-oily formulation washes out cleanly — no residue that interferes with reinstall or restyling.

Every bottle of bond remover comes out of the same 50L reactor as our other adhesive SKUs, under the same chemistry validation. The reactor runs separated line cycles for cyanoacrylate, UV, and acrylic PSA chemistries, so there is no cross-contamination between product lines or between brand-specific private-label runs.

The bond remover ships IATA-DG certified for air transport and comes with English-language MSDS refreshed per batch. If your market has specific adhesive classification rules — EU 1223/2009, REACH SVHC, U.S. FDA cosmetic registration — the paperwork we attach is sufficient for your filing without separate testing on your side.

  • Three formula typesKeratin remover, tape remover, universal remover
  • Fast release action30-90 second bond dissolution
  • No oily residueWashes out cleanly, no reinstall interference
  • Skin-safe formulationEU 1223/2009 cosmetic compliant
  • Container flexibility100ml salon, 250ml pro, 500ml bulk
Hair Extension Bond Remover Remover · 100ml Salon
Product Variants

Bond Remover Variants

Different formulas for different bond types.

Best Seller
Keratin Bond Remover
Variant Ⅰ · Fusion

Keratin Bond Remover

Standard keratin remover for K-tip, I-tip, U-tip bond dissolution. Fast-release formula.

Bond TypeKeratin
Release Time30-60 sec
Size100/250ml
Use caseFusion install take-down
Tape Bond Remover
Variant Ⅱ · Adhesive

Tape Bond Remover

Specialized tape adhesive remover. Dissolves acrylic tape bond without leaving sticky residue.

Bond TypeTape adhesive
Release Time60-90 sec
Size100/250ml
Use caseTape-in take-down
UV Bond Remover
Variant Ⅲ · LED-Cure

UV Bond Remover

UV-cure resin remover. Dissolves LED-cured bonds without excessive scrubbing.

Bond TypeUV resin
Release Time45-75 sec
Size100/250ml
Use caseUV bond take-down
Universal Remover
Variant Ⅳ · Multi-purpose

Universal Remover

Works on all bond types. Slightly slower release, one-bottle solution for mixed salons.

Bond TypeAll
Release Time60-120 sec
Size100/250/500ml
Use caseMulti-method salon
Product Gallery

See Every Remover Format

Bottle detail, spray application, and take-down demo.

Remover Salon BottleRemover Salon Bottle
Applicator DetailApplicator Detail
UV RemoverUV Remover
Universal BottleUniversal Bottle
Tape RemoverTape Remover
Bulk RefillBulk Refill
Take-Down DemoTake-Down Demo
Kit With CombKit With Comb
Private LabelPrivate Label
Specifications

Complete Product Spec Sheet

Every variant in one table so you can spec out your order without a callback.

AttributeKeratinTapeUVUniversal
Base FormulaAlcohol + surfactantAlcohol + solventAlcohol + solventMulti-solvent blend
Target BondKeratin polymerAcrylic tapeUV resinAll bond types
Release Time30-60 sec60-90 sec45-75 sec60-120 sec
ApplicationDropsSpray or dropsDropsSpray
Container Sizes100/250ml100/250ml100/250ml100/250/500ml
Bulk Format1L refill1L refill1L refill1L / 5L refill
Oily ResidueNoneNoneNoneMinimal
Skin SafetyEU 1223/2009EU 1223/2009EU 1223/2009EU 1223/2009
Shelf Life24 months24 months18 months24 months
MOQ (Wholesale)100 units100 units100 units100 units
Private Label MOQ500 units500 units500 units500 units
Factory-Standard Guarantees · Uniform Across All Variants
Reactor Batch Size50L in-house50L in-house50L in-house50L in-house
Peel Adhesion Test> 8N per 25mm> 8N per 25mm> 8N per 25mm> 8N per 25mm
Skin-Contact SafetyPatch-tested per batchPatch-tested per batchPatch-tested per batchPatch-tested per batch
IATA-DG ComplianceAir-shipment readyAir-shipment readyAir-shipment readyAir-shipment ready
EU 1223/2009Cosmetic-grade compliantCosmetic-grade compliantCosmetic-grade compliantCosmetic-grade compliant
Shelf Life24 months from batch date24 months from batch date24 months from batch date24 months from batch date
MSDS DocumentationEnglish, refreshed per lotEnglish, refreshed per lotEnglish, refreshed per lotEnglish, refreshed per lot
Fill Volume Tolerance± 3% declared± 3% declared± 3% declared± 3% declared
Container Seal Test100% inspected pre-ship100% inspected pre-ship100% inspected pre-ship100% inspected pre-ship
Master Carton MarkingDG label + batch numberDG label + batch numberDG label + batch numberDG label + batch number
Regulatory & Compliance Standards · Documentation Available
Regulatory Filing SupportDocumentation for FDA / EU CPNP / ASEAN filingsDocumentation for FDA / EU CPNP / ASEAN filingsDocumentation for FDA / EU CPNP / ASEAN filingsDocumentation for FDA / EU CPNP / ASEAN filings
Third-Party Lab TestingSGS or Intertek pulls arrangeable at buyer costSGS or Intertek pulls arrangeable at buyer costSGS or Intertek pulls arrangeable at buyer costSGS or Intertek pulls arrangeable at buyer cost
Batch Traceability SerialUnique serial per carton, links to source ledgerUnique serial per carton, links to source ledgerUnique serial per carton, links to source ledgerUnique serial per carton, links to source ledger
Retained Batch Sample12 months minimum (hair) / 24 months (adhesive)12 months minimum (hair) / 24 months (adhesive)12 months minimum (hair) / 24 months (adhesive)12 months minimum (hair) / 24 months (adhesive)
QC Documentation LanguageEnglish, refreshed per lot, notarized on requestEnglish, refreshed per lot, notarized on requestEnglish, refreshed per lot, notarized on requestEnglish, refreshed per lot, notarized on request
How It Works

Bond Remover Application Workflow

Same take-down flow for all bond types — formula difference is release time.

Stage Ⅰ
Ⅰ

Apply Remover

Drop or spray remover onto bond.

Stage Ⅱ
Ⅱ

Wait Release

Let formula dissolve bond 30-120 seconds.

Stage Ⅲ
Ⅲ

Slide Off

Slide extension strand off natural hair.

Stage Ⅳ
Ⅳ

Wash Residue

Wash natural hair with clarifying shampoo. Our shampoo is pH 5.5–6.5, extension-safe-tested through 10-wash cycles on real tape-in and K-tip samples.

Stage Ⅴ
Ⅴ

Reinstall Ready

Hair clean, ready for reinstall or fresh install. Most products deliver 3 reinstall cycles before extension retires; care routine strongly affects cycle count.

Production & Quality

How Every Pack Is Built

Documented QC from raw material intake through sealed pack.

ChBatch Cook

Batch Chemistry Verify

GC-MS analysis on every 50L reactor batch. Deviation from formulation spec triggers batch rejection and log entry. Every batch carries a serial number that tracks back through color lot, tying station, pack shift, and ship date.

PaQC Bench

Peel Adhesion Test

180° peel from stainless steel plate. Threshold > 8N per 25mm strip. Sub-spec batches never leave the plant.

CtQC Bench

Cure Time Verify

Full-hardness cure timed. UV bond: <30s at 365nm. Solvent bond: <5 min air. Each new batch validated before packaging. Full-hardness cure validated per batch: UV < 30 seconds at 365nm; solvent < 5 minutes air set.

ViQC Bench

Viscosity Check

Brookfield DV-E viscometer per batch. Spec range set per SKU. Batches outside range are reworked, not shipped. Brookfield DV-E viscometer per batch; spec range set per SKU, out-of-range batches are reworked.

ScCompliance

Skin-Contact Safety

Dermal patch test on batch sample. Documented per lot. Same standard as medical-adjacent adhesive markets. Patch-tested per batch, documented against ISO 10993-10 sensitization reference criteria.

SlAging Lab

Shelf Life Confirm

24-month accelerated aging simulation on retained sample. Ensures the label date matches real-world performance.

DgCompliance

IATA-DG Compliance

Flash point, packing group, and DGD paperwork produced in-house per lot. Air-shipment-ready by default. ISO 9001 + EU 1223/2009 + IATA-DG + FDA cosmetic reg support; documentation current-year and refreshed per lot.

MsCompliance

MSDS Refresh

English-language MSDS regenerated per batch, EU 1223/2009 aligned. Included with every shipment. English-language MSDS refreshed per batch, EU 1223/2009 aligned, included with every shipment automatically.

FfPack Gate

Pack Fill Verify

Precision scale, ± 3% tolerance on declared volume. Bottles filled short or over are rejected before capping.

Sl2Pack Gate

Container Seal Test

Pressure and leak test on every filled bottle. No container leaves the plant without individual seal verification.

Wholesale Program

Order Bond Remover by the Case

Standard remover formulas at wholesale pricing.

  • MOQ 100 units per SKU on liquid
  • Standard containers: 100ml / 250ml / 500ml
  • Bulk 1L / 5L refill available
  • Full SDS + EU documentation
  • Full payment upfront — no partial deposits
  • Air freight or express only
See Wholesale Program
Private Label

Your Brand on Every Pack

Full private label with custom color, packaging, and specs.

  • Custom container size & shape
  • Custom cap color & label design
  • Custom formula (keratin / tape / UV / universal)
  • Custom applicator (drops / spray)
  • MOQ 500 units on private label
  • Custom orders require full payment upfront
Start Private Label
Ideal Buyers

Who Buys Remover From VeeJeen

Every salon doing extension take-downs plus consumable distributors.

Buyer Ⅰ

All Extension Salons

Every salon doing extension take-down cycles. Validated against 400+ salon accounts across 25 countries; install times and wear data are from real salon floor.

 Buyer Ⅱ

Distributors

Distributors stocking full consumables line. Distributor accounts unlock 8–12% below salon wholesale price, split-ship to 8 destinations per PO.

 Buyer Ⅲ

Beauty Stores

Retail beauty stores.

 Buyer Ⅳ

Online Retailers

Retailers selling to at-home users.
Related Products

What Ships With Remover

Products commonly ordered together.

Extension Glue

Extension Glue

Fresh bond for reinstall.
Extension Tape

Extension Tape

Fresh tape for retape.
Extension Shampoo

Extension Shampoo

Post-removal cleansing.
Install Tools

Install Tools

Complete take-down kit.
Product FAQ

Bond Remover Buying Questions Answered

Q1What is hair extension bond remover?
Bond remover is a solvent solution that dissolves the adhesive or keratin bond holding hair extensions in place. Different formulas for different bond types — keratin, tape, UV. Applied with drops or spray, dissolves bond in 30-120 seconds.
Q9How do you ensure batch-to-batch adhesive consistency?
Every 50L reactor batch is GC-MS analyzed against our reference formulation before packaging. Batches outside the chemistry spec are reworked, not shipped. Peel adhesion (>8N/25mm) and cure time (<30s UV / <5min solvent) are measured per batch and recorded on the batch QC card that ships with the shipment.
Q10What is the correct storage protocol at my warehouse?
Cyanoacrylate keratin bond: sealed and refrigerated (4–10°C) prolongs shelf life to full 24 months. UV bond: sealed, dark storage at room temperature. Tape adhesive: original packaging, cool dry place. Bond quality drops fastest with humidity and UV exposure — avoid both.
Q11Can you produce a custom cure time or viscosity for our brand?
Yes, on private label with 500+ unit MOQ. Custom cure times available: UV 20–60 seconds; solvent 3–10 minutes. Custom viscosity available: 3,000–15,000 cP. Formulation feasibility review takes 3 weeks and includes patch testing for skin safety per EU 1223/2009.
Q12What IATA-DG paperwork do you produce per shipment?
For every adhesive air shipment we generate the Shipper's Declaration for Dangerous Goods (DGD) in-house, per lot. Documentation includes UN number, proper shipping name, packing group, net quantity per package, and packing instructions. The DGD is emailed with your shipping paperwork same-day pickup.
Q2Do I need a different remover for K-tip vs tape vs UV?
Ideally yes. Each remover formula is tuned to dissolve its target bond type fastest. Universal Remover works on all bond types but slightly slower. Multi-method salons buy Universal for one-bottle simplicity.
Q3Is remover safe for natural hair?
Yes. All formulas pass skin patch testing and meet EU cosmetic safety. Non-oily formulation washes out cleanly — no residue that damages hair. Follow with clarifying shampoo for full clean before reinstall.
Q4How long does it take to remove a full-head install?
Depends on install type and strand count. K-tip full head: 30-45 minutes. Tape-in full head: 45-60 minutes. UV full head: 30-45 minutes. Faster with Universal Remover practiced technique.
Q5What is the MOQ for wholesale remover?
MOQ 100 units per SKU on liquid consumables. Bulk 1L/5L refills sold separately with own MOQ. Private label requires 500 units minimum.
Q6Do you offer private label remover?
Yes. Private label covers container size, cap color, label design, custom formula, and applicator style (drops vs spray). MOQ 500 units per SKU on private label.
Q7Can I ship remover as air freight?
Yes. Formulation is IATA-DG certified for air freight. UN classification and SDS included with air waybill. Sea freight not offered for solvent-based liquids.
Q8What payment terms apply to orders?
Bank transfer, Alibaba Trade Assurance, PayPal, and Western Union. Custom and private label orders require 100 percent payment upfront. Stock orders also require full payment before production or shipment. No partial deposits.
Chat on WhatsApp Email cici@veejeen.com Back to top